24/7 Support : +1 714 705-4780
sales@internetofindustrials.com
Request a Quote for Part PFP-48 & M3V KIT, 5FZV4 by Finish Thompson - Electric Drum Pumps Parts
Thank you for your interest in our available industrial products PFP-48 & M3V Kit on Internet of Industrials. Electric Operated Drum Pump, Basic Pump with Discharge Hose, 115V AC, 4/5 hp Motor HP is a part that belongs to the family of Electric Drum Pumps components, and it is manufactured by Finish Thompson. With the part number PFP-48 & M3V Kit, this item is currently available for purchase today through our website. To begin the purchasing process, we invite you to fill out and submit an Instant RFQ form as provided through our website. Once received, a member of our staff will reach out to you in 15 minutes or less to provide a personalized quote based on your individual needs.
Industrial Product Characteristics of Part PFP-48 & M3V Kit |
|
|---|---|
| Adapter Material | Polypropylene |
| Agency Compliance | CSA |
| Bung Connection Dia. | 2 |
| Compatible Chemicals | Acetic Acid 20%, Acetic Acid 80%, Citric Acid 50%, Formic Acid, Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrochloric/Muriatic Acid (100%), Phosphoric Acid (40% Solution), Sulfuric Acid (to 10%), Sulfuric Acid (10% - 75%), Antifreeze (Coolant), Ethylene Glycol, Calcium Chloride, Sodium Bicarbonate (10%), Ammonium Hydroxide, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Potassium Hydroxide (50%), Fresh Water, Salt Water, Deionized Water, Sodium Bisulfate, Sodium Bisulfite, Fertilizers, Fungicides, Herbicides |
| Cord Length | 12 ft. |
| Diesel Exhaust Fluid Compatible | No |
| Discharge Connection Type | Hose Barb |
| Discharge Tube Outlet ID | 1 |
| Discharge Tube Outlet OD | 1-5/16 |
| Duty Cycle | Continuous |
| Explosion Proof | No |
| Food Grade | No |
| For Container Size | 275 gal. |
| For Container Type | Tote |
| For Use With | Corrosive Chemicals Transfer |
| Frequency (Hz) | 60 |
| Full Load Amps | 5.6 |
| Height Above Container | 15-1/3 |
| Hose Inside Dia. | 1 |
| Hose Length | 60 |
| Hose Outside Dia. | 1-5/16 |
| Hose Tube Material | PVC |
| Housing Material - Pumps | Polypropylene |
| Includes | Pump, Motor, Hose, Clamp |
| Includes Bung Adapter | No |
| Includes Discharge Hose | Yes |
| Includes Nozzle | No |
| Includes Suction Tube | Yes |
| Max. Flow Rate | 40 gpm |
| Max. Fluid Temp. | 160 Degrees F |
| Max. Head - Pumps | 80 ft. |
| Max. Head Pressure | 35 psi |
| Max. Outlet Pressure | 35 psi |
| Max. Viscosity | 500 cP |
| Metered | No |
| Min. Fluid Temp. | 35 Degrees F |
| Motor Enclosure | ODP |
| Motor HP | 4/5 |
| Motor RPM | 3500 to 10,000 |
| Motor Type | Universal AC |
| Noise Level | 79 db |
| Not Recommended Chemicals | Acetic Acid (Glacial), Chromic Acid 5%, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 50%, Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Sulfuric Acid (75% - 100%), Acetone, Methyl Ethyl Ketone (MEK), Ethyl (Ethanol), Isopropyl (Isopropanol), Methyl (Methanol), Glycerin, Cyclohexane, Gasoline, Heptane, Hexane, Kerosene, Stoddard Solvent (Mineral Spirits), Diesel Fuel, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Ethyl Acetate, Biodiesel, Formaldehyde 40%, Formaldehyde, Hydrazine, Sodium Hypochlorite/Bleach (to 20%), Lacquer Thinners, Toluene, Xylene, Trichlorethylene (50%), DEF, E85, Anhydrous Ammonia, Ammonia (Liquids), Automatic Transmission Fluid, Brake Fluid, Naphtha, Paint Thinner, Turpentine, Windshield Washer Fluid |
| Number of Phases | 1 |
| Overall Length | 60 |
| Plug Type | NEMA 5-15 |
| Power Source | Electric |
| Pump Connection Type | Smooth Bore |
| Pump Package Type | Basic Pump with Discharge Hose |
| Rated Voltage | 115VAC |
| Runs Dry | No |
| Seal Material | Fluoroelastomer |
| Self-Priming | Yes |
| Series | PF |
| Suction Tube ID | 2 |
| Suction Tube Length | 48 |
| Suction Tube Material | Polypropylene |
| Suction Tube OD | 2 |
| Thermal Protection | No |
| Variable Speed | Yes |
| Wetted Materials | Polypropylene, PTFE, PVDF, FKM, Alloy 625 and PVC |
If you have more than one item,upload your spreadsheet here.
|
Guaranteed On - Time Delivery |
|
Customized & User-Friendly Database |
|
Over 5100 Manufacturers |
|
Competitive Prices |
|
Scheduling Flexibility |
|
Complete Purchasing Solutions |
Semiconductor's Certifications and Memberships
We hope that you will visit us again the next time you need industrial parts and make us your strategic purchasing partner.
Request for Quote